How to find the perimeter? What is a perimeter? What does the perimeter look like?

A little theory:

Perimeter is the length of a geometric figure along its outer border.

The perimeter of a rectangle is the sum of the lengths of its sides.

Formulas for calculating the perimeter of a rectangle: P = 2*(a+b) or P = a + a + b + b.

Let's recap! To calculate the perimeter of a rectangle, add up all of its sides.

Typical mathematical and practical tasks:

Task #1:

Initial data: Determine the perimeter of a rectangle with side lengths of 5 cm and 10 cm.

Solution:

According to the formula, the perimeter of a rectangle is = 2 * (5 + 10) = 30 cm.

Answer: 30 cm.

Task #2:

Initial data: Determine the sides of the rectangle expressed as integers, if the perimeter of the rectangle is 10.

Solution:

According to the formula, we determine the sum of the lengths of the sides (a + b) \u003d P / 2 \u003d 10 / 2 \u003d 5
Integer side values ​​can only be 1 + 4 = 5 and 2 + 3 = 5

Answer: The lengths of the sides can only be 2 and 3 or 1 and 4.

Task number 3 (practical):

Initial data: Determine the number of skirting boards in sufficient quantity to repair the floor in a room 5 meters long and 3 meters wide, if the length of one skirting board is 3 meters.

Solution:

Room perimeter = 2 * (5 + 3) = 16 meters
Number of skirting boards = 16 / 3 = 5.33 pieces
Usually in building stores, skirting boards are sold not by linear meters, but by the piece. Therefore, we take the following integer. It's six.

Answer: The number of skirting boards is 6 pieces.

Finally:

Solving the problem of calculating the perimeter is a fairly simple mathematical problem, but it has a very important practical value, for example, in construction or general planning of the territory.

This page provides the simplest online calculator for calculating the perimeter of a rectangle. With this program, you can find the perimeter of a rectangle in one click if you know its length and width.

Perimeter - one of the mathematical, or rather, geometric terms, is used mainly to calculate the sides of a figure.

From our article, you will learn what a perimeter is and how it is measured using the example of basic geometric shapes.

Perimeter definition

The perimeter is the total length of all sides or the circumference of a figure. The perimeter is denoted with a capital letter “P”, and it can be measured in various units of length, such as millimeters (mm), centimeters (cm), meters (m), etc. For different shapes, there are different formulas for finding the perimeter. Below we will give some examples of how to find out the perimeter of a rectangle and some other shapes.

We measure the perimeter

If you need to find out the perimeter of a complex figure (such figures include figures with uneven lines), then for this you will need a rope or thread. With the help of these things, it is necessary to describe the exact contour of the figure, and in order not to get confused, you can make marks on the rope with a pencil. Or you can just cut it off, and then attach all the parts to the ruler. Thus, you will find out what the perimeter of almost any complex figure is.

There is another device for calculating the perimeter of complex figures: it is called a curvimeter (roller rangefinder). With it, you need to set the roller to any point of the figure and describe the contour of the figure with the roller. The resulting number will be equal to the perimeter. You can learn about finding the perimeter of other geometric shapes from our article. Well, we will tell you about several more ways to change the perimeter for different shapes.

Circle, square, equilateral triangle

Let's also look at how to find out the perimeter of a circle. It's pretty simple: you just need to determine the circumference, and you can do this by multiplying the radius "r" by the number π≈3.14 and then by 2 (P=L=2∙π∙r).

Today we will talk about how to calculate polygon perimeter. But first, let's talk about the variety of figures. Look at the picture. What figures do we see here? These are a rectangle and a square - polygons that have four sides, as well as a triangle with three sides, and a pentagon with five sides.

And how to find the perimeter of these figures?

To find the perimeter of a polygon, add the lengths of all its sides..

The perimeter is indicated by a capital Latin letter R.

Let's look at a few examples.

Calculate the perimeter of the polygon O. As we said earlier, the perimeter of a polygon is the sum of the lengths of all its sides. Let's add all the sides of our polygon:

P \u003d 15 + 17 + 10 + 10 + 20 + 15 \u003d 87

But you can calculate the perimeter in another way, using multiplication. We see that some sides of the polygon are the same. We have two sides of 15 conventional units and two more of 10. Let's write the expression:

P \u003d 15 × 2 + 10 × 2 + 17 + 20 \u003d 87

Now let's talk about the features of calculating the perimeter of some polygons.

A rectangle is a quadrilateral whose opposite sides are equal. For example, to calculate A with sides a and b, you need to add these sides and multiply the result by 2:

P(rectangle) = (a + b) × 2

That is, if the side of the rectangle a \u003d 5 cm, and the side of the rectangle b \u003d 3 cm, then the perimeter of the rectangle will be:

P \u003d (5 + 3) × 2 \u003d 16 cm

But how to find the unknown sides of a rectangle if its perimeter and only one of the sides are known?

P(rectangle) = 2 × a + 2 × b

a \u003d (P - 2 × b) ÷ 2 or b \u003d (P - 2 × a) ÷ 2

Example: The perimeter of a rectangle is 16 cm, side a = 5 cm. What are the other sides of the rectangle?

If we know one side of a rectangle, then the lengths of two of the four sides are known to us. Let's find the other two sides. That is, we find one, and the second will be equal to it.

side b \u003d (16 - 2 × 5) ÷ 2 \u003d 3 cm

Answer: A rectangle has two sides of 5 cm and two of 3 cm.

A square is a rectangle with all sides equal. To calculate, you need to multiply the length of one side by 4:

P(square) = a × 4

For example, square B has side a = 5 cm. To find its perimeter:

P (B) \u003d 5 × 4 \u003d 20 cm

And if the perimeter of a square is known, how to find the lengths of its sides? Very simply, you need to divide its perimeter into four:

a = P ÷ 4

Example: The perimeter of a square is 24 cm. What are its sides?

a = 24 ÷ 4 = 6

Answer: The sides of a square are 6 cm.

In the similarity of calculating the perimeter of a square, the perimeter of all equilateral polygons. That is, it is equal to the length of one of its sides multiplied by the number of sides.

If the length of one side of the polygon is a, and the number of its sides is n, then its perimeter will be equal to:

P(equilateral polygon) = a × n

For example, a pentagon D has side a = 6 cm. Let's find its perimeter:

R (D) \u003d 6 × 5 \u003d 30 cm

Well, if the perimeter of an equilateral polygon is known, then calculating the lengths of its sides is very simple, you need to divide its perimeter by the number of sides.

One of the basic concepts of mathematics is the perimeter of a rectangle. There are many problems on this topic, the solution of which cannot do without the perimeter formula and the skills to calculate it.

Basic concepts

A rectangle is a quadrilateral in which all angles are right and opposite sides are pairwise equal and parallel. In our life, many figures are in the shape of a rectangle, for example, the surface of a table, a notebook, and so on.

Consider an example: a fence must be placed along the boundaries of the land. In order to find out the length of each side, you need to measure them.

Rice. 1. Land plot in the shape of a rectangle.

The land plot has sides with a length of 2 m, 4 m, 2 m, 4 m. Therefore, in order to find out the total length of the fence, you must add the lengths of all sides:

2+2+4+4= 2 2+4 2 =(2+4) 2 =12 m.

It is this value that is generally called the perimeter. Thus, to find the perimeter, you need to add all the sides of the figure. The letter P is used to designate the perimeter.

To calculate the perimeter of a rectangular figure, you do not need to divide it into rectangles, you need to measure only all sides of this figure with a ruler (tape measure) and find their sum.

The perimeter of a rectangle is measured in mm, cm, m, km, and so on. If necessary, the data in the task are converted into the same measurement system.

The perimeter of a rectangle is measured in various units: mm, cm, m, km, and so on. If necessary, the data in the task is converted into one system of measurement.

Shape Perimeter Formula

If we take into account the fact that opposite sides of a rectangle are equal, then we can derive the formula for the perimeter of a rectangle:

$P = (a+b) * 2$, where a, b are the sides of the figure.

Rice. 2. Rectangle, with opposite sides marked.

There is another way to find the perimeter. If the task is given only one side and the area of ​​\u200b\u200bthe figure, you can use to express the other side through the area. Then the formula will look like this:

$P = ((2S + 2a2)\over(a))$, where S is the area of ​​the rectangle.

Rice. 3. Rectangle with sides a, b.

Exercise : Calculate the perimeter of a rectangle if its sides are 4 cm and 6 cm.

Solution:

We use the formula $P = (a+b)*2$

$P = (4+6)*2=20 cm$

Thus, the perimeter of the figure is $P = 20 cm$.

Since the perimeter is the sum of all the sides of a figure, the semi-perimeter is the sum of only one length and width. Multiply the semi-perimeter by 2 to get the perimeter.

Area and perimeter are the two basic concepts for measuring any figure. They should not be confused, although they are related. If you increase or decrease the area, then, accordingly, its perimeter will increase or decrease.

What have we learned?

We have learned how to find the perimeter of a rectangle. And also got acquainted with the formula for its calculation. This topic can be encountered not only when solving mathematical problems, but also in real life.

Topic quiz

Article rating

Average rating: 4.5. Total ratings received: 373.

We do not use many formulas from the school mathematics course in everyday life. However, there are equations that are used, if not on a regular basis, then from time to time. One of these formulas is the calculation of the perimeter of a figure.

What is a perimeter?

The perimeter is the total length of all sides of a geometric figure. For its designation, the letter of the Latin alphabet "R" is used. Simply put, to find the perimeter, you need to measure the lengths of all sides of a geometric figure and add the resulting values. The length is calculated with a conventional measuring instrument, such as a ruler, tape measure, centimeter tape, and so on.

The units of measurement are respectively centimeters, meters, millimeters and other measures of length. The length of a side of a polygon is calculated by applying a measuring device from one vertex to another. The beginning of the division scale of the device must coincide with one of the vertices. The second numeric value that the other vertex hits is the length of the side of the polygon. In the same way, it is necessary to measure all the lengths of the sides of the figure and add the resulting values. The unit of perimeter is the same unit used to measure the side of a shape.

A rectangle should be called a geometric figure, which consists of four sides of different lengths and three corners of which are straight. When constructing such a figure on a plane, it turns out that its sides will be equal in pairs, but not all are equal to each other. What is the perimeter of a rectangle? It is also the total length of all figure lengths. But since two sides of a rectangle have the same value, in calculating the perimeter, you can add the lengths of two adjacent sides twice. The unit of measurement for the perimeter of a rectangle is also the generally accepted units of measurement.

A triangle should be called a geometric figure that has three angles (both of different values ​​and the same) and consists of segments formed from the points of intersection of the rays that form the angles. A triangle has three sides and three angles. Two of the three sides can be equal in it. Such a triangle should be considered isosceles. There are such figures in which all three sides are equal to each other. It is customary to call such triangles equilateral.

What is the perimeter of a triangle? Its calculation can be carried out by analogy with the perimeter of a quadrilateral. The perimeter of a triangle is equal to the total length of the lengths of its sides. Calculating the perimeter of a triangle in which two sides are equal - isosceles - is simplified by multiplying one length of equal sides by two. To the value obtained, you must add the value of the length of the third side. Calculating the perimeter of a triangle with equal sides can be reduced to a simple calculation of the product of one length of a side of a triangle by three.

Applied Perimeter Value

The calculation of the perimeter in everyday life is used in many areas, but most often when performing construction, geodetic, topographic, architectural, planning work. But the listed scope of perimeter calculation, of course, is not limited.

For example, when performing geodetic and topographic works, it is very often necessary to calculate the perimeter of the boundaries of a certain area. But in practice, the plots rarely have the correct shape. Therefore, the calculation of the length of the perimeter occurs according to the formula for calculating the sum of the lengths of all sides of the section.

The need to calculate the perimeter of the site is very often due to the fact that you need to know how much material is required to install fences. Even a simple personal plot needs to measure the perimeter in order to competently enclose it with a fence.

Measuring devices on the ground

To calculate the perimeter on the ground, it is impossible to use a simple student ruler. Therefore, specialists use special devices. Of course, the simplest and most affordable option is to measure the length of the site boundary in steps. The step size of an adult is approximately one meter. Sometimes one meter and twenty centimeters. But this method is very inaccurate and gives a large measurement error. It is suitable if there is no need to accurately calculate the length of the border, but there is a need to simply estimate the approximate length.

For a more accurate calculation of the length of the sides of the site and, accordingly, the perimeter, there are special devices. First of all, you can use a special metal tape measure or a regular wire.

There are also special measuring devices such as rangefinders. Devices are optical, laser, light, ultrasonic. It should be remembered that the farther the rangefinder is able to measure the distance, the higher its error. Such devices are used in geodetic and topographic surveys.